List of packaging standards developed by ISO: part 1

ISO 186:2002, Paper and board -- Sampling to determine average quality

ISO 187:1990, Paper, board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

ISO/TS 210:2014, Essential oils -- General rules for packaging, conditioning and storage

ISO 217:2013, Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction

ISO 287:2009, Paper and board -- Determination of moisture content of a lot -- Oven-drying method

ISO 534:2011, Paper and board -- Determination of thickness, density and specific volume

ISO 535:2014. Paper and board -- Determination of water absorptiveness -- Cobb method

ISO 536:2012, Paper and board -- Determination of grammage

ISO 638:2008, Paper, board and pulps -- Determination of dry matter content -- Oven-drying method

ISO 780:1997, Packaging -- Pictorial marking for handling of goods

ISO 1924-1:1992, Paper and board -- Determination of tensile properties --

Part 1: Constant rate of loading method

ISO 1924-2:2008, Paper and board -- Determination of tensile properties --

Part 2: Constant rate of elongation method (20 mm/min)

ISO 1924-3:2005, Paper and board -- Determination of tensile properties --

Part 3: Constant rate of elongation method (100 mm/min)

ISO 1974:2012, Paper -- Determination of tearing resistance -- Elmendorf method

ISO 2144:2015, Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C

ISO 2206: 1987, Packaging -- Complete, filled transport packages -- Identification of parts when testing

ISO 2233:2000, Packaging -- Complete, filled transport packages and unit loads -- Conditioning for testing

ISO 2234:2000, Packaging -- Complete, filled transport packages and unit loads -- Stacking tests using a static load

ISO 2244:2000, Packaging -- Complete, filled transport packages and unit loads -- Horizontal impact tests

ISO 2247:2000, Packaging -- Complete, filled transport packages and unit loads -- Vibration tests at fixed low frequency

ISO 2248:1985, Packaging -- Complete, filled transport packages -- Vertical impact test by dropping

ISO 2469:2014, Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)

ISO 2470-1:2009, Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)

ISO 2470-2:2008, Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness)

ISO 2471:2008, Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method

ISO 2493-1:2010, Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection

ISO 2493-2:2011, Paper and board -- Determination of bending resistance -- Part 2: Taber-type tester

ISO 2528:1995, Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method

ISO 2758:2014, Paper -- Determination of bursting strength

ISO 2759:2014, Board -Determination of bursting strength

ISO 2873:2000, Packaging -- Complete, filled transport packages and unit loads -- Low pressure test

ISO 2875:2000, Packaging -- Complete, filled transport packages and unit loads -- Water-spray test

ISO 2876:1985, Packaging -- Complete, filled transport packages -- Rolling test

ISO 3034:2011, Corrugated fibreboard -- Determination of single sheet thickness

ISO 3035:2011, Corrugated fibreboard -- Determination of flat crush resistance

ISO 3036:1975, Board -- Determination of puncture resistance

ISO 3037:2013, Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)

ISO 3038:1975, Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion

ISO 3039:2010, Corrugated fibreboard -- Determination of grammage of the component papers after separation

ISO 3394:2012, Packaging -- Complete, filled transport packages and unit loads -- Dimensions of rigid rectangular packages

ISO 3676:2012, Packaging -- Complete, filled transport packages and unit loads -- Unit load dimensions

ISO 3689:1983, Paper and board -- Determination of bursting strength after immersion in water

ISO 3781:2011, Paper and board -- Determination of tensile strength after immersion in water

ISO 3783:2006, Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model)

ISO 3863:1989, Cylindrical cork stoppers -- Dimensional characteristics, sampling, packaging and marking

ISO 3869:2001,Composition cork -- Expansion joint fillers -- Specifications, packaging and marking

ISO 4046-1:2002, Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index

ISO 4046-2:2002, Paper, board, pulps and related terms -- Vocabulary -- Part 2: Pulping terminology

ISO 4046-3:2002, Paper, board, pulps and related terms -- Vocabulary -- Part 3: Paper-making terminology

ISO 4046-4:2002, Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products

ISO 4046-5:2002, Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board

ISO 4094:2005, Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories

ISO 4178:1980, Complete, filled transport packages -- Distribution trials -- Information to be recorded

ISO 4707:1981, Cork -- Stoppers -- Sampling for inspection of dimensional characteristics

ISO 4709:2000, Composition cork -- Gasket material -- Classification system, requirements, sampling, packaging and marking

ISO 4710:2000, Cork -- Cylindrical stoppers for sparkling wines and gasified wines -- Characteristics

ISO 4714:2000, Composition cork -- Specifications, sampling, packaging and marking

ISO 4180:2009, Packaging -- Packaging -- Complete, filled transport packages -- General rules for the compilation of performance test schedule

ISO 5495:2005, Sensory analysis -- Methodology -- Paired comparison test

ISO 5626:1993, Paper -- Determination of folding endurance

ISO 5627:1995, Paper and board -- Determination of smoothness (Bekk method)

ISO 5628:2012, Paper and board -- Determination of bending stiffness -- General principles for two-point, three-point and four-point methods

ISO 5629:1983, Paper and board -- Determination of bending stiffness -- Resonance method

ISO 5630-1:1991, Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C

ISO 5630-2:1985, Paper and board -- Accelerated ageing -- Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity

ISO 5630-3:1996, Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity

ISO 5630-4:1986, Paper and board -- Accelerated ageing -- Part 4: Dry heat treatment at 120 or 150 degrees C

ISO 5630-5:2008, Paper and board -- Accelerated ageing -- Part 5: Exposure to elevated temperature at 100 degrees C

ISO 5630-6:2009, Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide)

ISO 5630-7:2014, Paper and board -- Accelerated ageing -- Part 7: Exposure to light

ISO 5631-1:2009, Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)

ISO 5631-2:2014, Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)

ISO 5631-3:2014, Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)

ISO 5647:1990, Paper and board -- Determination of titanium dioxide content

ISO 6587:1992, Paper, board and pulps -- Determination of conductivity of aqueous extracts

ISO 6588-1:2012, Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction

ISO 6588-2:2012, Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction

ISO 6590-1:1983, Packaging -- Sacks -- Vocabulary and types -- Part 1: Paper sacks

ISO 6590-2:1986. Packaging -- Sacks -- Vocabulary and types -- Part 2: Sacks made from thermoplastic flexible film

ISO 6591-1:1984, Packaging -- Sacks -- Description and method of measurement -- Part 1: Empty paper sacks

ISO 6591-2:1985, Packaging -- Sacks -- Description and method of measurement -- Part 2: Empty sacks made from thermoplastic flexible film

ISO 6599-1:1983, Packaging -- Sacks -- Conditioning for testing -- Part 1: Paper sacks

ISO 5633:1983, Paper and board -- Determination of resistance to water penetration

ISO 5635:1978, Paper -- Measurement of dimensional change after immersion in water

ISO 5636-1:1984, Paper and board -- Determination of air permeance (medium range) -- Part 1: General method

ISO 5636-3:2013, Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method

ISO 5636-4:2013, Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method

ISO 5636-5:2013, Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method

ISO 5636-6:2015, Paper and board -- Determination of air permeance (medium range) -- Part 6: Oken method

ISO 5637:1989, Paper and board -- Determination of water absorption after immersion in water

ISO 5638:1978, Solid fibreboard -- Determination of grammage of single layers

ISO 6383-1:1983, Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method

ISO 6383-2:1983, Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method

ISO 7023:1983, Packaging -- Sacks -- Method of sampling empty sacks for testing

ISO 7348:1992, Glass containers -- Manufacture – Vocabulary

ISO 7458:2004, Glass containers -- Internal pressure resistance -- Test methods

ISO 7459:2004, Glass containers -- Thermal shock resistance and thermal shock endurance -- Test methods

ISO 7263:2011, Corrugating medium -- Determination of the flat crush resistance after laboratory fluting

ISO 7765-1:1988, Plastics film and sheeting -- Determination of impact resistance by the freefalling dart method -- Part 1: Staircase methods

ISO 7765-2:1994, Plastics film and sheeting -- Determination of impact resistance by the freefalling dart method -- Part 2: Instrumented puncture test

ISO 7965-1:1984, Packaging -- Sacks -- Drop test -- Part 1: Paper sacks

ISO 7965-2:1993, Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film

ISO 8106:2004, Glass containers -- Determination of capacity by gravimetric method -- Test method

ISO 8226-1:1994, Paper and board -- Measurement of hygroexpansivity -- Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %

ISO 8226-2:1990, Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %

ISO 8254-1:2009, Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam, TAPPI method

ISO 8254-2:2003, Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method

ISO 8254-3:2004, Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method

ISO 8317:2003, Child-resistant packaging -- Requirements and testing procedures for reclosable packages

ISO 8318:2000, Packaging -- Complete, filled transport packages and unit loads -- Sinusoidal vibration tests using a variable frequency

ISO 8351-1:1994, Packaging -- Method of specification for sacks -- Part 1: Paper sack

ISO 8351-2:1994, Packaging -- Method of specification for sacks -- Part 2: Sacks made from thermoplastic flexible film

ISO 8367-1:1993, Packaging -- Dimensional tolerances for general purpose sacks -- Part 1: Paper sacks

ISO 8367-2:1993, Packaging -- Dimensional tolerances for general purpose sacks -- Part 2: Sacks

 

List of packaging standards developed by ISO: part 2

ISO 8362-4:2011, Injection containers and accessories -- Part 4: Injection vials made of moulded glass

ISO 8474:1986, Packaging -- Complete, filled transport packages -- Water immersion test

ISO 8768: 1987, Packaging -- Complete, filled transport packages -- Toppling test

ISO 8784-1:2014, Pulp, paper and board -- Microbiological examination -- Part 1: Enumeration of bacteria and bacterial spores based on disintegration

ISO 8787:1986, Paper and board -- Determination of capillary rise -- Klemm method

ISO 8791-1:1986, Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method

ISO 8791-2:2013, Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method

ISO 8791-3:2005, Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method

ISO 8791-4:2007, Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method

ISO 9008:1991, Glass bottles -- Verticality -- Test method

ISO 9057:1991, Glass containers -- 28 mm tamper-evident finish for pressurized liquids – Dimensions

ISO 9058:2008, Glass containers -- Standard tolerances for bottles

ISO 9184-1:1990, Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method

ISO 9184-2:1990, Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide

ISO 9184-3:1990, Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test

ISO 9184-4:1990, Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test

ISO 9184-5:1990, Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)

ISO 9184-6:1994, Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness

ISO 9184-7:1994, Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor

ISO 9197:2006, Paper, board and pulps -- Determination of water-soluble chlorides

ISO 9198:2001, Paper, board and pulp -- Determination of water-soluble sulfates

ISO 9416:2009, Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

ISO 9706:1994, Information and documentation -- Paper for documents -- Requirements for permanence

ISO 9884-1:1994, Tea sacks -- Specification -- Part 1: Reference sack for palletized and containerized transport of tea

ISO 9884-2:1999, Tea sacks -- Specification -- Part 2: Performance specification for sacks for palletized and containerized transport of tea

ISO 9895:2008, Paper and board -- Compressive strength -- Short-span test

ISO 9932:1990, Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods

ISO 10531:1992, Packaging -- Complete, filled transport packages -- Stability testing of unit loads

ISO/PRF TR 10688, Paper, board and pulps -- Basic terms and equations for optical properties

ISO 10716:1994, Paper and board -- Determination of alkali reserve

ISO 10775:2013, Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method

ISO 11093-1:1994, Paper and board -- Testing of cores -- Part 1: Sampling

ISO 11093-2:1994, Paper and board -- Testing of cores -- Part 2: Conditioning of test samples

ISO 11093-3:1994, Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method

ISO 11093-4:1997, Paper and board -- Testing of cores -- Part 4: Measurement of dimensions

ISO 11093-5:2009, Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation

ISO 11093-6:2005, Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method

ISO 11093-7:2011, Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method

ISO 11093-8:2012, Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

ISO 11093-9:2006, Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance

ISO 11156:2011, Packaging -- Accessible design -- General requirements

ISO 11357-1:2009, Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles

ISO 11357-2:2013, Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height

ISO 11357-3:2011, Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization

ISO 11357-4:2005, Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity

ISO 11357-5:2013, Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

ISO 11357-6:2008, Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

ISO 11357-7:2002, Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics

ISO 11418-1:2005, Containers and accessories for pharmaceutical preparations -- Part 1: Dropdispensing glass bottles

ISO 11418-2:2005, Containers and accessories for pharmaceutical preparations -- Part 2: Screwneck glass bottles for syrups

ISO 11418-3:2005, Containers and accessories for pharmaceutical preparations -- Part 3: Screwneck glass bottles (veral) for solid and liquid dosage forms

ISO 11418-4:2005, Containers and accessories for pharmaceutical preparations -- Part 4: Tablet glass bottles

ISO 11475:2004, Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)

ISO 11476:2010, Paper and board -- Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)

ISO 11480:1997, Pulp, paper and board -- Determination of total chlorine and organically bound chlorine

ISO 11556:2005, Paper and board -- Determination of curl using a single vertically suspended test piece

ISO 11607-1: 2006, Packaging for terminally sterilized medical devices -- Part 1: Requirements for materials, sterile barrier systems and packaging systems.

ISO 11607-2: 2006, Packaging for terminally sterilized medical devices -- Part 2: Validation for Forming, Sealing, and Assembly Processes

ISO 11664-1:2007 (CIE S 014-1/E:2006), Colorimetry -- Part 1: CIE standard colorimetric observers

ISO 11664-2:2007 (CIE S 014-2/E:2006), Colorimetry -- Part 2: CIE standard illuminants

ISO 11683:1997, Packaging -- Tactile warnings of danger – Requirements

ISO 11897:1999, Packaging -- Sacks made from thermoplastic flexible film -- Tear propagation on edge folds

ISO 11513:2011, Gas cylinders -- Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene) -- Design, construction, testing, use and periodic inspection ISO 12048:1994, Packaging -- Complete, filled transport packages -- Compression and stacking tests using a compression tester

ISO 12192:2011, Paper and board -- Determination of compressive strength -- Ring crush method

ISO 12625-1:2011, Tissue paper and tissue products -- Part 1: General guidance on terms

ISO 12625-3:2014, Tissue paper and tissue products -- Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk

ISO 12625-4:2005, Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption

ISO 12625-5:2005, Tissue paper and tissue products -- Part 5: Determination of wet tensile strength

ISO 12625-6:2005, Tissue paper and tissue products -- Part 6: Determination of grammage

ISO 12625-7:2014, Tissue paper and tissue products -- Part 7: Determination of optical properties -- Measurement of brightness and colour with D65/10° (outdoor daylight)

ISO 12625-8:2010, Tissue paper and tissue products -- Part 8: Water-absorption time and waterabsorption capacity, basket-immersion test method

ISO 12625-9:2015, Tissue paper and tissue products -- Part 9: Determination of ball burst strength

ISO 12625-11:2012, Tissue paper and tissue products -- Part 11: Determination of wet ball burst strength

ISO 12625-12:2010, Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency

ISO 12625-15:2015, Tissue paper and tissue products -- Part 15: Determination of optical properties -- Measurement of brightness and colour with C/2° (indoor daylight) illuminant

ISO 12625-16:2015, Tissue paper and tissue products -- Part 16: Determination of optical properties -- Opacity (paper backing) -- Diffuse reflectance method

ISO 12821:2013 , Glass packaging -- 26 H 180 crown finish – Dimensions

ISO 12818:2013, Glass packaging -- Standard tolerances for flaconnage

ISO 12822:2015, Glass packaging -- 26 H 126 crown finish – Dimensions

ISO 12830:2011, Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

ISO 13106:2014, Plastics -- Blow-moulded polypropylene containers for packaging of liquid foodstuffs

ISO 13127:2012, Packaging -- Child resistant packaging -- Mechanical test methods for reclosable child resistant packaging systems

ISO 13274:2013, Packaging -- Transport packaging for dangerous goods -- Plastics compatibility 

testing for packaging and IBCs

ISO 13302:2003, Sensory Analysis – Methods for assessing modifications to the flavour of foodstuffs due to packaging

ISO 13355:2001, Packaging -- Complete, filled transport packages and unit loads -- Vertical random vibration test

ISO 13542:2006, Paper and board -- Specification for internal diameters of cores for reels

ISO 13820:2014, Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment

ISO 13821:2002, Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method

ISO 14968:1999, Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets

ISO 15119:2000, Packaging -- Sacks -- Determination of the friction of filled sacks

ISO 15318:1999, Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB)

ISO 15320:2011, Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract

ISO 15359:1999, Paper and board -- Determination of the static and kinetic coefficients of friction - - Horizontal plane method

ISO 15378:2011, Primary packaging materials for medicinal products -- Particular requirements for the application of

ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)

ISO 15394:2009, Packaging -- Bar code and two-dimensional symbols for shipping, transport and receiving labels

ISO 15750-1:2002, Packaging -- Steel drums -- Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l

ISO 15750-2:2002, Packaging -- Steel drums -- Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

ISO 15750-3:2002, Packaging -- Steel drums -- Part 3: Inserted flange-type closure systems

ISO 15754:2009, Paper and board -- Determination of z-directional tensile strength

ISO 15755:1999, Paper and board -- Estimation of contraries

ISO 15987:2003, Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films

ISO 15988:2003, Plastics -- Film and sheeting -- Biaxially oriented poly(ethylene terephthalate) (PET) films

ISO 15867:2003, Intermediate bulk containers (IBCs) for non-dangerous goods – Terminology

ISO 16101:2004, Packaging -- Transport packaging for dangerous goods -- Plastics compatibility testing

ISO 16103:2005, Packaging -- Transport packaging for dangerous goods -- Recycled plastics material

ISO 16104:2003, Packaging -- Transport packaging for dangerous goods -- Test methods

ISO 16106:2006, Packaging -- Transport packages for dangerous goods -- Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings -- Guidelines for the application of

ISO 9001 ISO/TR 16218:2013, Packaging and the environment -- Processes for chemical recovery

ISO/DIS 16260.2, Paper and board -- Determination of internal bond strength

ISO 16495:2013, Packaging -- Transport packaging for dangerous goods -- Test methods ISO 16532-1:2008, Paper and board -- Determination of grease resistance -- Part 1: Permeability test

ISO 16532-2:2007, Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test

 

List of packaging standards developed by ISO: part 3

ISO 16532-2:2007, Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test

ISO 16532-3:2010, Paper and board -- Determination of grease resistance -- Part 3: Turpentine test for voids in glassine and greaseproof papers

ISO/TS 16775:2014, Packaging for terminally sterilized medical devices -- Guidance on the application of ISO 11607-1 and ISO 11607-2

ISO 16820:2004, Sensory analysis -- Methodology -- Sequential analysis

ISO 16883:2007, Packaging -- Transport packages for dangerous goods -- Test methods for large packagings.

ISO 16945:2014, Corrugating medium -- Determination of the edge crush resistance after laboratory fluting

ISO/TR 17098:2013, Packaging material recycling -- Report on substances and materials which may impede recycling

ISO 17351:2013, Packaging -- Braille on packaging for medicinal products

ISO 17363:2013, Supply chain applications of RFID -- Freight containers

ISO 17364:2013, Supply chain applications of RFID -- Returnable transport items (RTIs) and returnable packaging items (RPIs)

ISO 17365:2013, Supply chain applications of RFID -- Transport units

ISO 17366:2013, Supply chain applications of RFID -- Product packaging

ISO 17367:2013, Supply chain applications of RFID -- Product tagging

ISO/TR 17370:2013, Application Guideline on Data Carriers for Supply Chain Management

ISO/DIS 17451-1, Packaging -- Codification of contents for inventories for shipments of household goods and personal effects -- Part 1: Alphanumeric codification of inventories and manifests

ISO 17480:2015, Packaging -- Accessible design -- Ease of opening

ISO 17555:2003, Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films

ISO 17557:2003, Plastics -- Film and sheeting -- Cast polypropylene (PP) films

ISO 17812:2007, Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper

ISO/TS 17958:2013, Paper and board -- Determination of fracture toughness -- Constant rate of elongation method (1,7 mm/s)

ISO 18263-1:2015, Plastics -- Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging -- Part 1: Designation system and basis for specification

ISO/FDIS 18263-2, Plastics -- Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumenr packaging -- Part 2: Preparation of test specimens and determination of properties

ISO/DIS 18522, Paper and board - Automated off-line testing of physical properties for CD (cross direction) profiles

ISO 18601:2013, Packaging and the environment -- General requirements for the use of ISO standards in the field of packaging and the environment

ISO 18602:2013, Packaging and the environment -- Optimization of the packaging system

ISO 18603:2013, Packaging and the environment – Reuse

ISO 18604:2013, Packaging and the environment -- Material recycling

ISO 18605:2013, Packaging and the environment -- Energy recovery

ISO 18606:2013, Packaging and the environment -- Organic recycling ISO/CD 19709-1, Transport packaging -- Small load container systems -- Part 1: Common requirements and test methods

ISO/DTS 19709-2, Transport packaging -- Small load container systems -- Part 2: Column Stackable System (CSS)

ISO/DTS 19709-3 , Transport packaging -- Small load container systems -- Part 3: Bond Stackable System (BSS)

ISO/PRF TS 20460, Paper and board -- Automated on-line testing -- Metrological comparability between standardized measurements and output of on-line gauges

ISO 20848-1:2006, Packaging -- Plastics drums -- Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l

ISO 20848-2:2006, Packaging -- Plastics drums -- Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l

ISO 20848-3:2006, Packaging -- Plastics drums -- Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l

ISO 21067:2007, Packaging – Vocabulary

ISO/DIS 21067-1, Packaging -- Vocabulary -- Part 1: General terms

ISO/DIS 21067-2, Packaging -- Vocabulary -- Part 2: Packaging and the environment terms

ISO 21898:2004, Packaging -- Flexible intermediate bulk containers (FIBCs) for non-dangerous goods

ISO/TS 22002-4:2013, Prerequisite programmes on food safety -- Part 4: Food packaging manufacturing

ISO 22742:2010, Packaging -- Linear bar code and two-dimensional symbols for product packaging

ISO 22715:2006, Cosmetics -- Packaging and labelling

ISO 22754:2008, Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement

ISO 22891:2013, Paper -- Determination of transmittance by diffuse reflectance measurement

ISO 23560:2015, Woven polypropylene sacks for bulk packaging of foodstuffs

ISO/IEC TR 24729-1:2008, Information technology -- Radio frequency identification for item management -- Implementation guidelines -- Part 1: RFID-enabled labels and packaging supporting

ISO/IEC 18000-6C ISO/AWI TR 24498, Paper, board and pulps -- Estimation of uncertainty for test methods

ISO 28219:2009, Packaging -- Labelling and direct product marking with linear bar code and twodimensional symbols IEC 61340-4-4:2005, Electrostatics -- Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

ISO/IEC Guide 41:2003, Packaging -- Recommendations for addressing consumer needs

MATERIAL STANDARDS

https://www.astm.org/Standards/paper-and-packaging-standards.html

 

https://www.brcglobalstandards.com/media/545195/p556-iso-9001-to-issue-5-issue-1-august-2017.pdf

 

http://www.ipiindia.org/other-presentations?task=callelement&format=raw&item_id=991&element=cf0577f3-519f-4fe3-9d25-658179076aff&method=download

 

https://www.astm.org/Standards/plastics-standards.html

 

 

PROCESS / DESIGN STANDARDS

https://railcis.org/packaging-standards/packaging-specifications-manual/standards-compliance-packaging-guidelines/

PRODUCT / APPLICATIONAL STANDARDS

STANDARD AND/OR PROJECT (60) STAGE TC ISO/IEC GUIDE 41:2018

Packaging — Recommendations for addressing consumer needs 60.60 ISO/COPOLCO

ISO 780:2015 Packaging — Distribution packaging — Graphical symbols for handling and storage of packages 90.93 ISO/TC 122

ISO 3394:2012 Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages 90.93 ISO/TC 122

ISO 3676:2012 Packaging — Complete, filled transport packages and unit loads — Unit load dimensions 90.93 ISO/TC 122

ISO 8317:2015 Child-resistant packaging — Requirements and testing procedures for reclosable packages 90.60 ISO/TC 122/SC 3

ISO 11156:2011 Packaging — Accessible design — General requirements 90.93 ISO/TC 122 ISO 11683:1997 Packaging — Tactile warnings of danger — Requirements 90.93 ISO/TC 122 ISO 13127:2012 Packaging — Child-resistant packaging — Mechanical test methods for reclosable child-resistant packaging systems 90.93 ISO/TC 122/SC 3

ISO 13127:2012/COR 1:2012 Packaging — Child-resistant packaging — Mechanical test methods for reclosable child-resistant packaging systems — Technical Corrigendum 1 60.60 ISO/TC 122/SC 3

ISO 13274:2013 Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs 90.93 ISO/TC 122/SC 3

ISO 13274:2013/COR 1:2014 Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs — Technical Corrigendum 1 60.60 ISO/TC 122/SC 3

ISO 14375:2018 Child-resistant non-reclosable packaging for pharmaceutical products — Requirements and testing 60.60 ISO/TC 122/SC 3

ISO 15394:2017 Packaging — Bar code and two-dimensional symbols for shipping, transport and receiving labels 60.60 ISO/TC 122

ISO 16103:2005 Packaging — Transport packaging for dangerous goods — Recycled plastics material 90.93 ISO/TC 122/SC 3

ISO 16106:2020 Transport packages for dangerous goods — Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings — Guidelines for the application of ISO 9001 60.60 ISO/TC 122/SC 3

ISO/TR 16218:2013 Packaging and the environment — Processes for chemical recovery 60.60 ISO/TC 122/SC 4

ISO 16495:2013 Packaging — Transport packaging for dangerous goods — Test methods 90.92 ISO/TC 122/SC 3

ISO/DIS 16495 Packaging — Transport packaging for dangerous goods — Test methods 40.00 ISO/TC 122/SC 3

ISO/TR 17098:2013 Packaging material recycling — Report on substances and materials which may impede recycling 60.60 ISO/TC 122/SC 4

ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs) 60.60 ISO/TC 122

ISO 17351:2013 Packaging — Braille on packaging for medicinal products 90.93 ISO/TC 122 ISO 17363:2013 Supply chain applications of RFID — Freight containers 90.93 ISO/TC 104/SC 4

ISO/IEC CD 17364 Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs) 30.60 ISO/IEC JTC 1/SC 31

ISO 17364:2013 Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs) 90.92 ISO/IEC JTC 1/SC 31

ISO/IEC CD 17365 Supply chain applications of RFID — Transport units 30.60 ISO/IEC JTC 1/SC 31

ISO 17365:2013 Supply chain applications of RFID — Transport units 90.92 ISO/IEC JTC 1/SC 31

ISO/IEC CD 17366 Supply chain applications of RFID — Product packaging 30.60 ISO/IEC JTC 1/SC 31

ISO 17366:2013 Supply chain applications of RFID — Product packaging 90.92 ISO/IEC JTC 1/SC 31

ISO/IEC DIS 17367 Supply chain applications of RFID — Product tagging 40.60 ISO/IEC JTC 1/SC 31

ISO 17367:2013 Supply chain applications of RFID — Product tagging 90.92 ISO/IEC JTC 1/SC 31

ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management 60.60 ISO/TC 122

ISO 17451-1:2016 Packaging — Codification of contents for inventories for shipments of household goods and personal effects — Part 1: Numeric codification of inventories 60.60 ISO/TC 122

ISO/TS 17451-2:2017 Packaging — Codification of contents for inventories for shipments of household goods and personal effects — Part 2: XML messaging structure for electronic transmission of inventory data 90.60 ISO/TC 122

ISO 17480:2015 Packaging — Accessible design — Ease of opening 90.93

ISO/TC 122 ISO/TR 18568:2021 Packaging and the environment — Marking for material identification 60.60 ISO/TC 122/SC 4

ISO 18601:2013 Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment 90.93 ISO/TC 122/SC 4

ISO 18602:2013 Packaging and the environment — Optimization of the packaging system 90.93 ISO/TC 122/SC 4

ISO 18603:2013 Packaging and the environment — Reuse 90.93 ISO/TC 122/SC 4

ISO 18604:2013 Packaging and the environment — Material recycling 90.93 ISO/TC 122/SC 4 ISO 18605:2013 Packaging and the environment — Energy recovery 90.93 ISO/TC 122/SC 4 ISO 18606:2013 Packaging and the environment — Organic recycling 90.93 ISO/TC 122/SC 4 ISO/TS 18614:2016 Packaging — Label material — Required information for ordering and specifying self-adhesive labels 90.93 ISO/TC 122

ISO 19709-1:2016 Transport packaging — Small load container systems — Part 1: Common requirements and test methods 60.60 ISO/TC 122

ISO/TS 19709-2:2016 Transport packaging — Small load container systems — Part 2: Column Stackable System (CSS) 90.93 ISO/TC 122

ISO/TS 19709-3:2016 Transport packaging — Small load container systems — Part 3: Bond Stackable System (BSS) 90.93 ISO/TC 122

ISO 19809:2017 Packaging — Accessible design — Information and marking 60.60 ISO/TC 122

ISO 21067-1:2016 Packaging — Vocabulary — Part 1: General terms 60.60 ISO/TC 122

ISO 21067-2:2015 Packaging — Vocabulary — Part 2: Packaging and the environment terms 90.93 ISO/TC 122/SC 4

ISO 21976:2018 Packaging — Tamper verification features for medicinal product packaging 60.60 ISO/TC 122

ISO 22015:2019 Packaging — Accessible design — Handling and manipulation 60.60 ISO/TC 122

ISO/DTR 22251-1 Application Guideline for use of RFID on Returnable Transport Items — Part 1: For metal returnable transport items 30.99 ISO/TC 122

ISO 22742:2010 Packaging — Linear bar code and two-dimensional symbols for product packaging 90.60 ISO/TC 122

ISO 22982-1:2021 Transport packaging — Temperature-controlled transport packages for parcel shipping — Part 1: General requirements 60.60 ISO/TC 122

ISO 22982-2:2021 Transport Packaging — Temperature controlled transport packages for parcel shipping — Part 2: General specifications of testing 60.60 ISO/TC 122

ISO/DTS 22984 Reusable Transport Packaging — Cleaning and sanitation methods of reusable transport containers for food distribution purpose 30.99 ISO/TC 122

ISO 23412:2020 Indirect, temperature-controlled refrigerated delivery services — Land transport of parcels with intermediate transfer 60.60 ISO/TC 315

ISO/DIS 23416 General specifications and testing methods for temperature-sensitive medicinal packages in Good Distribution Practice principles 40.60 ISO/TC 122

ISO/DIS 23417 General specifications and validation methods for non-sterile medical device packages in good distribution practice principles 40.60 ISO/TC 122

ISO 28219:2017 Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols 60.60 ISO/TC 122

ISO 28862:2018 Packaging — Child-resistant packaging — Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

Transport related standards

ISO 780:2015

Packaging -- Distribution packaging -- Graphical symbols for handling and storage of packages

ISO 3394:2012

Packaging -- Complete, filled transport packages and unit loads

-- Dimensions of rigid rectangular packages

ISO 3676:2012

Packaging -- Complete, filled transport packages and unit loads

-- Unit load dimensions

ISO 4178:1980

Complete, filled transport packages -- Distribution trials

-- Information to be recorded

ISO 6590-1:1983

Packaging -- Sacks -- Vocabulary and types --

Part 1: Paper sacks

ISO 6590-2:1986

Packaging -- Sacks -- Vocabulary and types --

Part 2: Sacks made from thermoplastic flexible film

ISO 6591-1:1984

Packaging -- Sacks -- Description and method of measurement

-- Part 1: Empty paper sacks

ISO 6591-2:1985

Packaging -- Sacks -- Description and method of measurement

-- Part 2: Empty sacks made from thermoplastic flexible film

ISO 6599-1:1983

Packaging -- Sacks -- Conditioning for testing -- Part 1: Paper sacks

ISO 7023:1983

Packaging -- Sacks -- Method of sampling empty sacks for testing

ISO 7965-1:1984

Packaging -- Sacks -- Drop test -- Part 1: Paper sacks

ISO 7965-2:1993

Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film

ISO 8351-1:1994

Packaging -- Method of specification for sacks --

Part 1: Paper sacks

ISO 8351-2:1994

Packaging -- Method of specification for sacks --

Part 2: Sacks made from thermoplastic flexible film

ISO 8367-1:1993

Packaging -- Dimensional tolerances for general purpose sacks

-- Part 1: Paper sacks

ISO 8367-2:1993

Packaging -- Dimensional tolerances for general purpose sacks

-- Part 2: Sacks made from thermoplastic flexible film

ISO 11156:2011

Packaging -- Accessible design -- General requirements

ISO 11683:1997

Packaging -- Tactile warnings of danger -- Requirements

ISO 11897:1999

Packaging -- Sacks made from thermoplastic flexible film

-- Tear propagation on edge folds

ISO 15119:2000

Packaging -- Sacks -- Determination of the friction of filled sacks

ISO 15394:2017

Packaging -- Bar code and two-dimensional symbols for shipping,

transport and receiving labels

ISO 15750-1:2002

Packaging -- Steel drums -- Part 1: Removable head (open head)

drums with a minimum total capacity of 208 l, 210 l and 216,5 l

ISO 15750-2:2002

Packaging -- Steel drums -- Part 2: Non-removable head (tight head)

drums with a minimum total capacity of 212 l, 216,5 l and 230 l

ISO 15750-3:2002

Packaging -- Steel drums -- Part 3: Inserted flange-type closure systems

ISO 15867:2003

Intermediate bulk containers (IBCs) for non-dangerous goods

-- Terminology

ISO/TR 17350:2013

Direct Marking on Plastic Returnable Transport Items (RTIs)

ISO 17351:2013

Packaging -- Braille on packaging for medicinal products

ISO 17363:2013

Supply chain applications of RFID -- Freight containers

ISO 17364:2013

Supply chain applications of RFID -- Returnable transport items

(RTIs) and returnable packaging items (RPIs)

ISO 17365:2013

Supply chain applications of RFID -- Transport units

ISO 17366:2013

Supply chain applications of RFID -- Product packaging

ISO 17367:2013

Supply chain applications of RFID -- Product tagging

ISO/TR 17370:2013

Application Guideline on Data Carriers for Supply Chain Management

ISO 17451-1:2016

Packaging -- Codification of contents for inventories for shipments

of household goods and personal effects -- Part 1: Numeric

codification of inventories

ISO/TS 17451-2:2017

Packaging -- Codification of contents for inventories for shipments

of household goods and personal effects -- Part 2: XML messaging

structure for electronic transmission of inventory data

ISO 17480:2015

Packaging -- Accessible design -- Ease of opening

ISO/TS 18614:2016

Packaging -- Label material -- Required information for ordering and

specifying self-adhesive labels

ISO 18616-1:2016

Transport packaging -- Reusable, rigid plastic distribution boxes

-- Part 1: General purpose application

ISO 18616-2:2016

Transport packaging -- Reusable, rigid plastic distribution boxes

-- Part 2: General specifications for testing

ISO 19709-1:2016

Transport packaging -- Small load container systems

-- Part 1: Common requirements and test methods

ISO/TS 19709-2:2016

Transport packaging -- Small load container systems

-- Part 2: Column Stackable System (CSS)

ISO/TS 19709-3:2016

Transport packaging -- Small load container systems

-- Part 3: Bond Stackable System (BSS)

ISO 19809:2017

Packaging -- Accessible design -- Information and marking

ISO/NP TS 20075 [Under development]

Wooden Shipping Boxes and Crates

ISO 20848-1:2006

Packaging -- Plastics drums -- Part 1: Removable head (open head)

drums with a nominal capacity of 113,6 l to 220 l

ISO 20848-2:2006

Packaging -- Plastics drums -- Part 2: Non-removable head (tight head)

drums with a nominal capacity of 208,2 l and 220 l

ISO 20848-3:2006

Packaging -- Plastics drums -- Part 3: Plug/bung closure systems for

plastics drums with a nominal capacity of 113,6 l to 220 l

ISO/FDIS 20848-3 [Under development]

Packaging -- Plastics drums -- Part 3: Plug bung closure systems for

plastics drums with a nominal capacity of 113,6 l to 220 l

ISO 21067-1:2016

Packaging -- Vocabulary -- Part 1: General terms

ISO/FDIS 21976 [Under development]

Packaging -- Tamper verification features for medicinal product packaging

ISO/DIS 22015 [Under development]

Packaging -- Accessible design -- Handling and manipulation

ISO/DTR 22251 [Under development]

Application Guideline for use of RFID on Returnable Transport Items

ISO 22742:2010

 

Packaging -- Linear bar code and two-dimensional symbols for product

packaging

ISO/AWI 22982-1 [Under development]

Temperature controlled transport packaging -- Part 1: Part 1: General

requirements of temperature controlled transport packages for parcel shipping

ISO/AWI 22982-2 [Under development]

Temperature controlled transport packaging -- Part 2: General specifications

of testing of temperature controlled transport packages for parcel shipping

ISO/AWI TR 22984 [Under development]

Reusable Transport Packaging -- Cleaning and sanitation methods of reusable

transport containers for food distribution purpose

ISO 28219:2017

Packaging -- Labelling and direct product marking with linear bar code and

two-dimensional symbols

USER / CLIENT STANDARDS

https://www.unilever.com/about/innovation/open-innovation/challenges-and-wants/better-packaging.html

 

http://www.nestle.com/asset-library/documents/library/documents/vendors/nestle-quality-requirements-vendors-raw-packaging-materials.pdf

 

http://ilsi.eu/wp-content/uploads/sites/3/2016/11/Session2_Spack.pdf

 

http://www.argus-analysen.de/assets/plugindata/poola/nestle-guidance-note-on-packaging-inks-2016-08.pdf

 

https://us.pg.com/sustainability/environmental-sustainability/focused-on/packaging

 

 

ENVIRONMENTAL STANDARDS